For those considering a jump from Meraki MX 64 vs Cisco Meraki MX75, there are several specs you should look into before you do. Even if you feel like you’ve covered your bases already, it’s easy to overlook all of the fine print in the data sheets.
In short, the MX 64 is great for businesses that are just getting their feet off the ground. Small networks of up to roughly 50 users. With the MX75, this range is 100 to 200 users, making it a scalable option for existing users. This article dives into their differences so you know what you’re getting into, whether it’s an upgrade or a first-time buy.
The Meraki MX Series Showcases Quality
Being feature-rich on the surface is a pretty easy observation for anyone, but these firewalls from the Meraki MX series offer much more. Off the bat, it’s important to separate the target markets between the Meraki MX 64 and MX75.
Whereas the 64 is perfect for young businesses starting out, the 75 is geared toward organizations that have already seen some growth. Mid-sized to enterprise-level operations would benefit more, starting with and scaling from the 75, its next-gen, and PoE capabilities.
Regardless of which firewall you’re interested in, it’s helpful to keep in mind that the MX 64 will see its end of life in July 2027. This is just one of many reasons why businesses should have their eyes set on how firewall tech is changing over the years.
What is the Meraki MX 64?
If you’re new to the Cisco Meraki firewall MX 64, there’s not much to fret over, as it’s pretty easy to understand. In the same vein, this understanding is vital if you’re going to know what moves to make for your security architecture down the road.
Here are some core details about the MX 64:
- Firewall Throughput: 250 Mbps
- VPN Throughput: 100 Mbps
- Security Throughput: 200 Mbps
- Max VPN Tunnels: 50
- PoE Capabilities: No
If you know anything about firewall hardware, you can see why this is best for smaller operations. Even so, the MX 64 stands as a viable part of Meraki firewall solutions for a couple more years.
What is the Cisco Meraki Firewall MX75?
As you might expect, the MX75 delivers on a lot of the same benefits and capabilities, just with a bit more strength and higher thresholds. Highlighting another benefit, the MX75 doesn’t have an announced end-of-life date, meaning it still has quite a few years on the market.
Take a look at these surface-level specs to see how the Cisco network gear holds up against the MX 64:
- Firewall Throughput: 1,000 Mbps
- VPN Throughput: 1,000 Mbps
- Security Throughput: 1,000 Mbps
- Max VPN Tunnels: 75
- PoE Capabilities: 2x RJ45 and 1x Gigabit Ethernet port (LAN)
Although it’s pretty uniform from this viewpoint, it’s clear why this firewall would be a decent upgrade from the Meraki MX 64. The 75 isn’t your only option for an upgrade, but it acts as a more seamless transition for your network architecture.
Comparing the Meraki MX 64 vs MX75
The information covered in the table below is really just the starting point of your decision-making. Even so, it’s a lot better than getting lost in data sheet technicalities.
| Specifications | Cisco Meraki MX 64 | Cisco Meraki MX75 |
|---|---|---|
| Firewall Throughput (Mbps) | 250 | 1,000 |
| VPN Throughput (Mbps) | 100 | 1,000 |
| Security Throughput (Mbps) | 200 | 1,000 |
| Max VPN Tunnels | 50 | 75 |
| PoE Capabilities | N/A | 2x RJ45 1x Gigabit Ethernet port (LAN) |
| Max Device Count | 50 | 200 |
| WAN Interface | 1x dedicated GbE RJ45 1x convertible LAN/WAN GbE RJ45 | 1x dedicated GbE SFP 2 x dedicated GbE RJ45 |
| LAN Interface | 3x dedicated GbE RJ4 1x convertible LAN/WAN GbE RJ45 | 10 x dedicated GbE RJ45 |
| Power Load (idle/max) | 4W / 10W | 12W / 96W |
Feel free to read into them more if you’d like, but this comparison speaks volumes. Overall, due diligence with these specs is how you’ll get where your network architecture needs to go.
Let’s Wrap Up
You could spend hours sorting through pages of datasheet specs or simply focus on what matters most for your network. When it comes to Meraki MX 64 vs MX75, you’re better set for the long term by going with the 75.
The truth is that there are many Meraki solutions you could choose from at the end of the day. For those hoping to avoid some of the confusion along the way, speak with our team for direct answers on finding the right firewall solutions.
